We are leading supplier

Rotogravure Printing Machine

The scientific fuselage structure and intelligent operation configuration are the design and production standards of WLR - A series rotogravure.
Therefore, each WLR - A equipment can not only efficiently complete the printing job, but also allows company less dependent on operators.

Inquiry Price

WLAR - A Series Machine Classification

The standard models of the WLAR-A series rotogravure printing press are divided into 4 types according to the speed of the machine

WLR - A 450

Max.Mechanical Speed: 450 m/min

High printing speed, operating stable in high speed printing;

Printing set is composed of cast iron wallboard transom (upper wallboard thick 85mm ,The length of between each unit is 2500mm);

Separate heating box ( Stainless steel inner,Nozzle 14 pieces, material length 2500mm,the last dry box:nozzle 16 pieces,material length 2700mm).
WLR - A 400

Max.Mechanical Speed: 400 m/min
The most economical equipment for operation cost when do mass printing;
Printing set is composed of cast iron wallboard transom (upper wallboard thick 75mm ,The length of between each unit is 2200mm);
Separate heating box ( Stainless steel inner,Nozzle 12 pieces, material length 2200mm,the last dry box:nozzle 14 pieces,material length 2500mm).
WLR - A 350

Max.Mechanical Speed: 350 m/min
Economical and durable, easy to operate;
Printing set is composed of cast iron wallboard transom (upper wallboard thick 65mm ,The length of between each unit is 1900mm);
Separate heating box ( Stainless steel inner,Nozzle 10 pieces, material length 1900mm,the last dry box:nozzle 12pieces,material length 2200mm).
WLR - A 300P

Max.Mechanical Speed: 300 m/min
A press specially designed for all kinds of paper. Large diameter winding and unwinding;
Printing set is composed of cast iron wallboard transom (upper wallboard thick 65mm ,The length of between each unit is 1600mm);
Separate heating box ( Stainless steel inner,Nozzle 8 pieces, material length 1600mm,the last dry box:nozzle 10 pieces,material length 1900mm).

Identical Analysis

Common Points Of WLAR-A Series Models

Automatic Control System

新增页签

Drive mode - Electronic shaft
Horizontal automatic color registration
Vertical automatic color registration
Automatic tension control system

High Efficiency Device

新增页签

Double station winding and unwinding, realize non-stop refueling, uninterrupted operation
Automatic correction AIDS keep printed materials in the correct position throughout the printing process

Energy Saving & Environmental Protection System

新增页签

Air reduction and concentration heating system can recycle valuable and environmentally unfriendly waste solvent resources. The recovery rate is over 90%.

Each speed machine has 5 different print width models

新增页签

According to the width of the user's printing material, there are 5 subdivided models for each speed of printing equipment. Include:

Print width : 850mm (Max 950mm ~ Min 580mm)

Print width : 1050mm (Max 1150mm ~ Min 780mm)

Print width : 1250mm (Max 1350mm ~ Min 980mm)

Print width : 1450mm (Max 1550mm~ Min 1180mm)

Print width : 1650mm (Max 1380mm~ Min 1750mm)

Differential Analysis

Differentiation Of WLAR-A Series Models

In order to ensure the registration accuracy at different speeds and different running states, the tension control is the most appropriate.There are many differences in the configuration of the 4 rotogravure printing presses of WLR- A series